Contact Us

FEATURES


filter

 

filter
1 Straight-Line Air Flow; Blower, Sprays and Evaporative Panels
2 Large Volume, low RPM, Full Width Blower
3 Patented One-Piece Molded Wet-Selection  NO LEAKS!
4 Double Union, CPVC Ball Valve, for Evaporation Control
5 Maximum Wet area, IN-LINE* for Easy Air & Solution Flow
6 Rounded Turns for Smooth Air Flow
7 Up to 1-1/2 HP, All Ball Bearing Motor, 1.25 Service Factor, 1ø or 3 ø available
8 Up-Facing Exhaust, NO Elbows Needed
9 Custom designed, Stay-Wet Mist Eliminator for Maximum Droplet Retention. Optional "AirScrubber ™" Available for Near-Zero Discharge
10 Choice of Pumps to Fit Your Application
Strong, One-Piece, Molded "Tank". *No Welded Pieces to Crack or Leak. Lifetime Warranty.

 

Low Cost Installation Accessories
filter Ventilation Components include pipes, elbows and rain caps of moded polyethylene for easy, slip-together installation.

filter Pipe fittings of Schedule 80 CPVC.

filter El PUMP ™, an air-lift pump for counter-flowing, uses low-pressure air.

 filter LLCS™ (Liquid Level Control System, complete with solenoid valve).

 

filter

 

SPECIFICATIONS


Model ET-II ET-II-W ET-III ET-III-W
Crated Weight: 340 lbs. 290 lbs. 400 lbs. 330 lbs.
Dimensions: 56" Long, 69" High, 29" Wide 56" Long, 69" High, 38" Wide
Blower: 1 hp (2500 CFM) 1 hp* 1-1 1/2 hp (3300 CFM) 1-1 1/2 hp*
Pump Requirements:
10 psi (23 feet of head) Required at Evaporator		 16 gpm 21 gpm 24 gpm 45 gpm
Evaporative Area: 700 Sq. Ft. Variable 1,000 Sq.Ft. Variable
Bottom Drain: 2" FPT, Gravity Return
Temperature Limits: Ambient Air; 40 - 104° F, Solution 40 - 160°F
Vent Ducting: 16" Diameter, Available from POLY PRODUCTS INC.
Floor Space: (48" x 25") (48" x 25") (48" x 34") (48" x 34")
*available as 110/220V, 1 phase or 230/460V, 3 phase