Features
- Straight-Line Air Flow; Blower, Sprays and Evaporative Panels
- Large Volume, low RPM, Full Width Blower
- Patented One-Piece Molded Wet-Selection NO LEAKS!
- Double Union, CPVC Ball Valve, for Evaporation Control
- Maximum Wet area, IN-LINE* for Easy Air & Solution Flow
- Rounded Turns for Smooth Air Flow
- Up to 1-1/2 HP, All Ball Bearing Motor, 1.25 Service Factor, 1ø or 3 ø available
- Up-Facing Exhaust, NO Elbows Needed
- Custom designed, Stay-Wet Mist Eliminator for Maximum Droplet Retention. Optional "AirScrubber™" Available for Near-Zero Discharge
- Choice of Pumps to Fit Your Application
Low Cost Installation Accessories
- Ventilation Components include pipes, elbows and rain caps of moded polyethylene for easy, slip-together installation.
- Pipe fittings of Schedule 80 CPVC.
- El PUMP ™, an air-lift pump for counter-flowing, uses low-pressure air.
- LLCS™ (Liquid Level Control System, complete with solenoid valve).
Model |
ET-II-W |
ET-III-W |
|---|---|---|
| Crated Weight: | 290 lbs. | 330 lbs. |
| Dimensions: | 56" Long, 69" High, 29" Wide | 56" Long, 69" High, 38" Wide |
| Blower: | 1 hp (2500 CFM) 1 hp* | 1-1 1/2 hp (3300 CFM) 1-1 1/2 hp* |
| Pump Requirements: 10 psi (23 feet of head) Required at Evaporator |
21 gpm | 45 gpm |
| Evaporative Area: | Variable | Variable |
| Bottom Drain: | 2" FPT, Gravity Return | |
| Temperature Limits: | Ambient Air; 40 - 104° F, Solution 40 - 160°F | |
| Vent Ducting: | 16" Diameter, Available from POLY PRODUCTS INC. | |
| Floor Space: | (48" x 25") | (48" x 34") |
*available as 110/220V, 1 phase or 230/460V, 3 pha |
||